13-05-2012 - The guys have started sheeting the roof. We are using a 55mm roofing blanket under the sheets to improve the thermal performance of the house.
Over the weekend I extended the openings on double roller door. The frames were made with only a 2.1m opening for the roller doors. This was just a little small considering our 2.7m wall heights.
 |
| Bottom Plate removed |
I managed to squeeze an extra 200mm into the opening, bringing the total height to 2.3m. This will still leave a nice 2 1/2 brick header course above the doors.
 |
| All Done |
I ran out of daylight on Sunday so I'll have to tackle the second smaller roller door during the week.
 |
| Original Height on the single door, and new height on the double door. |
No comments:
Post a Comment